« Best Website for Technical Search in Physics | Main | When the least expensive component fails ....... »
Selecting The Right Technology .... |
November 08, 2005 |
|
Posted by Joe Lewis at November 8, 2005 04:16 PM |
|
One thing for sure, there is no panacea or single solution. Each application is different and should be reviewed independently of the next. Continuous level technologies and brands are not commodities. We conclude with a recommended process of application review and technology selection.
Problem: Selecting a continuous level measurement technology for your powder or bulk solid is not always a simple task. In fact many costly mistakes have been made, products taken out of service and costly rework has ensued. So, how do you avoid these mistakes or keep from making them again? I'd like to offer some assistance and the best thing I can think of is to share a white paper I recently published; "Technology Review - Level Measurement of Bulk Solids in Bins, Silos and Hoppers". Click here to download this white paper.
Solution: In this white paper we first discuss the challenges associated with continuous level measurement of powders and bulk solids. Next, we identify and review the pros and cons of each technology from a generic standpoint. This is based on our perspective as well as interviews with other manufacturers and users.
We hope this paper is helpful. You can also review the web seminar on the same subject by clicking here.
Any questions, let me know.
Joe Lewis
Vice President - Marketing & Sales
Monitor Technologies LLC
Phone: 800-766-6486 or +1-630-365-9403
Email: jlewis@monitortech.com
