« December 2007 | Main | February 2008 »
Level sensor mounting location for dummies....... |
January 07, 2008 |
|
Posted by at 04:27 PM | Comments (0) |
|
I might have blogged about this before so please bear with me if this sounds familiar, but it's very important.
Recently our senior application engineer drafted a story for our quarterly newsletter that highlighted the importance of selecting a proper location for the mounting of a continuous level sensor or inventory monitor.
Take a look at the picture here and you'll see his point. In this case the inventory in the silo is monitored using a smart weight & cable sensor. These devices are accurate and very reliable.
As you can see in the photo, the weight & cable just barely misses a cross-beam inside the silo. Making sure that you locate the sensor so as not to have obstructions within the path of the sensor is very important.
Want to read the rest of the story? Click here.
Joe Lewis
