|
From Powder and Bulk Dot Com Turnkey Systems
The starch prep area or "starch kitchen" as it’s called, forms the heart of the soup production process. It is essentially responsible for producing the soup base from a combination of dry and wet ingredients including cracker meal, cake flour, brine, tomato paste, corn syrup and spices. The metered major ingredients and pre-weighed minors are added to water and mixed to form the soup base. The base, combined with various vegetables and meats is then cooked to form a variety of final soup products. The starch kitchen design chosen by Del Monte called for cracker meal and cake flour to be supplied in FIBCs or bulk bags. Supervising Project Engineer, Roy Hanson invited AccuRate® and Pneutech Engineering to design and supply a food-grade bulk bag discharging and metering system that (a) would gravimetrically supply between 750 and 1500 lbs of either material to either of two 900 gallon stainless steel mix tanks in 10 minutes (b) would not exceed 21 feet in height and (c) could be quickly disassembled and cleaned using high pressure hot water. Working closely with Del Monte, AccuRate® and Pneutech Engineering first added a pneumatically actuated stainless steel turntable to an AccuRate® SacMaster® Bulk Bag Discharge Frame. The turntable enables an AccuRate® MECHATRON® Coni-Flex feeder to be automatically positioned to charge either of the two mix tanks. A cleaning position was also provided. Next, the hoist-loaded framework was increased in height so that the feeder could charge either mix tank directly. Eliminating screw conveyors from the design lowered the overall cost of the system and substantially simplified the cleaning process. With the cracker meal/cake flour supply feeder in the proper position, the operator starts the batching process using the touch screen of an Allen Bradley VersaView® 1500 M HMI station. Weight signals from IP68 rated stainless steel load cells positioned under each leg of the system; control the run cycle of the feeder and the flow of cracker meal or cake flour to the selected mix tank. Perhaps the highlight of the system design is the ease with which it can be disassembled and cleaned. USDA food-grade materials, clamps, gaskets and design practices were used throughout. Even the AccuRate® MECHATRON® screw feeder can be entirely disassembled and cleaned from the free-access side of the system without removing it from the turntable or SacMaster® Bulk Bag Discharge Framework. Roy Hanson stated, "The operators are all smiles whenever someone asks them about cleaning. It’s that simple." Today, two complete new starch kitchens are currently producing (6) 900 gallon batches of soup base an hour so there should be plenty of hot healthy soup for this year’s winter season. For more information contact: Mr. Gary Kuehneman 746 E. Milwaukee Street Whitewater, WI 53190 Tel: 800-798-4767 Fax: (262) 473-2489 Email: mktg@accuratefeeders.com Web site: www.accuratefeeders.com © Copyright 1998 - 2008 Powder and Bulk Dot Com |
