|
 |
Hauppauge, NY -- The new paddle blender was designed with a 100 cu.ft. working and a 110 cu. ft. full holding capacity. Designed for operation under vacuum to 29.5"hg, the blender will be used to mix and deaerate a viscous paste.
All wetted parts of the blender are of type 304-stainless steel and are polished to a 120-grit finish to assist in the ease of cleaning between mixes and color changes. A special pneumatically operated flush type plug valve was also supplied to eliminate dead spaces within the mix zone.
Paddle Blenders are typically used for the mixing and blending of dry powders and low viscosity pastes. These units are applied throughout the process industries and are available in many sizes from 0.5 to over 500 cu.ft. A wide range of optional features are available such as jackets for heating or cooling, sanitary designs, etc.
Ross mixing, blending, drying and dispersion equipment is manufactured on five continents and is marketed worldwide.
For additional information contact:
Mr. Bogard Lagman
Charles Ross and Son Company,
P.O. Box 12308
Hauppauge New York 11788
Telephone: 1-800-243-ROSS or 1-631-234-0500
Fax: 1-631-234-0691
Email: sales@mixers.com
Web site: http://www.mixers.com/
© Copyright 1998 - 2009 Powder and
Bulk Dot Com
Top of Page
