|
 |
Charlotte, NC -- Spiroflow Systems has introduced a new Bulk Bag Discharger with the ability to discharge powder material in problematic height-restricted areas where the raised forklift frame is higher than actual heights.
The Spiroflow Type 5 Bulk Bag Discharger utilizes a special removable frame design that reduces the necessary height for forklift tines. Where normal dischargers often require the forklift tines to use the bag loop frame and position the frame over the tensioning bars at the top of the discharger.
Spiroflow’s Type 5 Low Loading Discharger offers the comfort and convenience of allowing the operator to load the bag and frame at the lower half of the discharger. This is advantageous in that the forklift tines do not rise above the frame and thus can be used anywhere the discharger can fit without having several feet of overhead clearance.
The upper frame uses a unique sealing mechanism that ensures no product loss during discharge. The patented locking system allows easy access to the bag spout through a large viewing porthole.
The versatility of the discharger means that multiple bag frames can be purchased for batching different materials. Multiple options are available including loss-in-weight load cells and pneumatic bottom massage arms. The discharger is available in carbon steel, stainless steel, and a USDA/3A Dairy model.
Spiroflow is a worldwide supplier of a wide range of both standard and custom powder handling equipment, specializing in Bulk Bag Dischargers and Fillers, Mechanical, Flexible, and Pneumatic Conveyors, and Bag Packing equipment.
For more information contact:
Spiroflow Systems
Telephone: 704-291-9595
Fax: 704-291-9594
Email: info@spiroflowsystems.com.
Web site: http://www.spiroflowsystems.com/
© Copyright 1998 - 2009 Powder and
Bulk Dot Com
Top of Page
