|
 |
Fort Lee, NJ -- A recent increase in capacity required an additional L-size Turbo-Dryer® to heat-treat a fine (70 micron) metal oxide powder. This design is capable of operating at temperatures up to 650°C to calcine or sinter metal powders.
The unit includes an internal electrical heating system to provide the heat to remove the residual moisture. A small purge of dry air or nitrogen is used to purge water vapor from the system, keeping fines carryover to a minimum.
The Turbo-Dryer is a proprietary continuous tray dryer design that consists of a stack of rotating circular trays in a sealed enclosure. Material is fed onto the top tray, and after each revolution is wiped onto the next lower tray. The internal Turbo-Fans circulate heated gas in the enclosure to provide the drying medium.
Wyssmont Company designs, manufactures and services its high quality, reliable Turbo-Dryer worldwide to the chemical, specialty chemical, pharmaceutical, mineral, food and food additive industries. Founded in 1932, Wyssmont Company has solved many difficult drying problems and offered many benefits to the end user.
For more information contact:
Mr. Joseph Bevacqua
Wyssmont Company, Inc.
1470 Bergen Boulevard
Fort Lee, NJ 07024
Telephone: 201-947-4600
Fax: 201-947-0324
Email: sales@wyssmont.com
Web site: http://www.wyssmont.com/
© Copyright 1998 - 2009 Powder and
Bulk Dot Com
Top of Page
