 |
| Final assembly, ready for no-load test. |
Sao Paulo, Brazil -- In order to obtain greater efficiency during the charcoal grinding process for metalurgical purposes, Mavi is participating in a joint effort to set up an experimental full scale plant to reduce to appropriate levels of humidity something around 50 m3/h of reforestation derived charcoal.
This process is required during the rainy season in order to achieve a constant flow of charcoal powder for the operation of blast furnaces.
The drying media is burnt blast furnace gas which will be conducted to the vibratory equipment, forming the fluidized bed required for this operation.
The final stages of assembly are under way and most probably until the end of 2004 first test results will be obtained.
For more information contact:
R. Robert Bosch
Mavi Maquinas Vibratorias
Sao Paulo SP - Brazil
Telephone: +5511 3611 6200
Fax: +5511 3619 3975
Email: mavi@mavi.com.br
Web site: http://www.mavi.com.br/
© Copyright 1998 - 2012 Powder and
Bulk Dot Com
Top of Page
