| |
|
 |
BETHLEHEM, PA -- An in-line pneumatic batching system from Flexicon Corporation allows simultaneous weigh batching of major ingredients supplied in bulk bags and manual dumping of pre-weighed minor ingredients, and blending of the material while a subsequent batch is accumulated.
Each of the bulk bag dischargers is mounted on load cells, allowing loss-of-weight batching from either or both bulk bags. A system controller starts and stops each discharger's rotary airlock valve to weigh ingredients, first at high feed rate for rapid filling, then at dribble feed rate, stopping material flow once the accurate batch weight has been discharged. System software allows mid-batch bag changes.
Minor, pre-weighed ingredients are added at the manual dumping station after the major ingredients have been discharged from the bulk bags.
The dilute-phase, vacuum conveyor line terminates at a filter receiver (not shown) that accumulates the batch before discharging it through a slide gate valve into a ribbon blender, allowing concurrent batching and blending of materials, cutting cycle times by half.
The bulk bag dischargers are equipped with FLOW-FLEXER bag activators that raise and lower opposite bottom edges of the bag at timed intervals, loosening compacted materials and promoting material flow into the discharge spout. As the bag lightens, the stroke of the bag activators increases, raising the bottom of the bag into a steep "V" shape, while top-mounted POP-TOP stretching devices elongate the bag, promoting total evacuation of material with no manual intervention.
The dumping station collects dust generated during manual dumping activities by means of a high velocity vacuum fan that draws dust away from the operator onto two cartridge filters. An automatic reverse-pulse filter cleaning system releases short blasts of compressed air inside the filters at timed intervals causing dust build-up on the outer surfaces to fall into the hopper.
System components are available constructed of carbon steel with durable industrial finish, or stainless steel finished to industrial food, dairy or pharmaceutical standards.
Other equipment manufactured by the company includes flexible screw conveyors, bulk bag fillers, drum dumpers and engineered plant-wide bulk handling systems with automated controls.
For more information contact:
Flexicon Corporation
2400 Emrick Blvd.
Bethlehem, PA 18020-8006
Tel: 888 353 9426 or 610 814 2400
Fax: 610 814 0600
Email: sales@flexicon.com
Web site: http://www.flexicon.com
© Copyright 1998 - 2009 Powder and
Bulk Dot Com
Top of Page
|
|
| |
| Send news and case
histories to:
news@powderandbulk.com |
|
|
| |
|
|
|
I Live Newsfeed
I |
|
Increase traffic and add
content to your website
with our exclusive
newsfeed generator.
Our live newsfeed
allows you to
include news
headlines from our
News Center, right
on your homepage.
Headlines update in
real-time, automatically.
Click here to create
your own newsfeed! |
|
| |
|
 |
