|
Top Picks From Amazon.com |
|
Gas Cyclones and Swirl Tubes: Principles, Design, and
Operation |
Unit Operations of Particulate Solids: Theory and
Practice |
|
 |
 "..this
book covers all aspects of centrifugal gas cleaning
devices. These are cyclones used as gas-solid separators
for dedusting.."by by
A. Hoffmann, L. Stein
Paperback, 448 pages, 2010 |
 |
"..covers unit operations in
chemical engineering that involve the handling and
processing of particulate solids..."
by Enrique Ortega-Rivas
Hardcover, 492 pages, 2011 |
|
|
Model-Based Control of Particulate Processes |
Advanced Drying Technologies, 2nd Edition
|
|
 |
"..general methods for the
synthesis of nonlinear, robust and constrained feedback
controllers for broad classes of particulate process
models" by Panagiotis D.
Christofides
Paperback, 229 pages, 2011 |
 |
 "This
book gives new ideas for drying techniques. Very
innovative.."by by
T. Kudra, A. Mujumdar
Hardback, 430 pages, 2009 |
|
|
Drying of Porous Materials |
Densification of Biomass: Briquetting and Pelleting of
Biomass |
|
 |
"...a comprehensive
and in depth treatment...an excellent contribution to
the science and technology of drying of particulate
solids...."
by Stefan Jan Kowalski
(Editor)
Hardcover, 234 pages, 2007 |
 |
"...Densifying of
biomass into briquettes or pellets can reduce the cost
and increase the efficiency of handling, storage and
transport..."
by R. Vance Morey
Paperback, 360 pages, 2008 |
|
|
Modern Drying Technology: Volume 1: Computational Tools at Different Scales
|
Solid/Liquid Separation: Equipment Selection and Process Design
|
|
 |
"...a
comprehensive overview of all important aspects of
modern drying technology..."
by Evangelos Tsotsas
(Editor), Arun S. Mujumdar (Editor)
Hardcover, 359 pages, 2007 |
 |
"...a
start-to-finish plan for the various processes involved
in the operation..."
by Steve Tarleton and
Richard Wakeman
Hardcover, 464 pages, 2006 |
|
|
Powder Technology: Fundamentals of Particles,
Powder Beds, and Particle Generation |
Particle Breakage, Volume 12 |
|
 |
"This book
concentrates its coverage on powder/particle handling
methods and unit operations..."
by Hiroaki Masuda, Ko
Higashitani, Hideto Yoshida
Hardcover, 394 pages, 2006 |
 |
"...examines
particle breakage.. ranging from single particle through
groups of particles..."
by by Agba D. Salman, etal
1258 pages, 2007 |
|
|
Principles of Mineral Processing |
Handbook of Industrial Mixing : Science and Practice |
|
 |
"Destined to become
an industry standard...examines all aspects of minerals
processing..."
by M. Fuerstenau and K. Han
Hardcover, 584 pages, 2003 |
 |
"…most comprehensive
of the mixing handbooks currently available."
by Edward L. Paul, et al
Hardcover,1440 pages, 2003 |
|
| Scaleup
and Design of Industrial Mixing Processes |
Mujumdar's
Practical Guide to Industrial Drying |
|
 |
"...how to avoid full-scale
disasters that can occur with the scaleup of mixing and contacting
problems"
by Gary Benjamin Tatterson
Hardcover, 392 pages, April 2003 |
 |
"...advises
in a practical way for all people involved in drying related work -
engineer and researchers."
by Sakamon Devahastin (Editor),
Hardcover: 187 pages, May 2000 |
|
|
Principles
of Powder Technology |
Agglomeration in Industry : Occurence and Applications
(Volume 2 of 2) |
|
 |
"...presents the fundamental
engineering properties of materials, essential knowledge for the
design..."
by M. J. Rhodes (Editor)
Hardcover: 452 pages |
 |
"...up-to-date overview
dealing with the occurrence and key applications of
agglomeration..." by
Wolfgang Pietsch,
Hardcover: 834 pages, January 2005 |
|
|
Agglomeration Processes : Phenomena, Technologies,
Equipment (Volume 1 of 2) |
Turbulent
Mixing and Chemical Reactions |
|
 |
"...describes the
binding mechanisms, structure, and characteristics of
agglomerates..." by
Wolfgang Pietsch,
Hardcover: 622 pages, March 2002 |
 |
"Understanding this phenomenon
enables chemists to carry out reactions more selectively..."
by John R. Bourne et al.,
Hardcover: 890 pages, February 1999 |
|
|
Applying
S88: Batch Control from a User's Perspective |
Drying
of Loose and Particulate Materials |
|
 |
"From designing better processes
to combining recipes with equipment control to execution..."
by Jim Parshall, Larry Lamb
Paperback: 158 pages, September 1999 |
 |
"...a guide to the principles of
industrial drying of particulate and loose solids..."
by R. B. Keey
Library Binding: 514 pages, September 1991 |
|
|
Sands,
Powders, and Grains: An Introduction To the Physics of Granular
Materials |
Process
Plant Machinery |
|
 |
"Discusses mixing and segregation of heterogeneous materials..."
by Duran, Reisinger & Fujimoto
Hardcover, 314 pages, March 2000 |
 |
"...a unique single-source
reference for engineers, managers, and technical personnel"
by Heinz P. Bloch, Claire Soares,
Hardcover, 512 pages, 2nd edition, 1998 |
|
|
Powder
and Bulk Solids Handling Processes |
The
Dynamics of Fluidized Particles |
|
 |
by Koichi Iinoya, et al.
Hardcover, July 1988 |
 |
by Roy Jackson
Hardcover: 368 pages, September 2000 |
|
|
New
Quantitative Approach to Powder Technology |
Mixing
of Solids
(Powder Technology Series, No. 12) |
|
 |
by Yoshimoto Wanibe and Takashi Itoh
Hard Cover, June 1998 |
 |
"...covers the
theoretical & practical aspects of the mixing of
solids..." by Ralf Weinekotter, Hermann Gericke
Hardcover, 176 pages, 2011
|
|
|
Statics
and Kinematics of Granular Materials |
Solid-Liquid
Filtration and Separation Technology |
|
 |
"...the
bible for powder technology researchers"
by R.M. Nedderman
Hardcover, December 1992
|
 |
"The volume details
design data on solid-liquid separation processes..."
Y. A. Rushton, A. S. Ward, R. G. Holdich,
Paperback, 539 pages, May 1996
|
|
|
Mathematical
Modeling and Numerical Techniques in Drying Technology |
Fluid
Bed Technology in Materials Processing |
|
 |
"...numerical techniques to solve specific drying problems in areas
such as foods and grains, wood, and pharmaceuticals."
by Ian Turner and A. S. Mujumdar
Hardcover, 1996
|
 |
"..comprehensively covers the
various aspects of fluidization engineering..."
by C. K. Gupta, D. Sathiyamoorthy
Hardcover, 560 pages, February 1999
|
|
Processing
of Particulate Solids
(Powder Technology Series) |
Mineral
Processing Technology:
An Introduction to the Practical Aspects of Ore Treatment and Mineral Recovery |
|
 |
"...characterization of bulk mechanical properties, fluid-particle systems, gas/solid separation, and storage and discharge of
particle bulk solids." by J. Seville, U. Tuzun and R. Clift,
Hard Cover, August 1997
|
 |
"...a good book for mineral
dressing" by B. A. Wills
Paperback, 6th Edition, May 1997
|
|
|
Fine
Particles: Synthesis, Characterization, and Mechanisms of Growth |
Chemistry
of Powder Production |
|
 |
(Surfactant Science, Vol 92)
by Tadao Sugimoto (Editor)
Hardcover: 738 pages, October 2000
|
 |
"...focuses on the solid-state chemistry of
powder materials..." By Y. Arai
Hard Cover, September 1996
|
|
|
Handbook
of Batch Processing Design |
Polymer
Mixing: A Self-Study Guide |
|
 |
"...this handbook
has been written to address this problem and to bring
together design and process analysis methods ...of batch
process design..."
by P. N. Sharratt (editor)
Hard Cover, First Edition, January 1998
|
 |
"Covers
the fundamental aspects of polymer mixing as well as
modern mixing equipment..."
by Chris Rauwendaal
Hardcover: 255 pages, February 1998 |
|
|
Industrial
Centrifugation Technology |
Powder
Technology Handbook |
|
 |
"The first comprehensive
reference on all aspects of industrial centrifugation
technology." by Wallace Woon-Fong Leung
Hardcover, 430 pages, March 1998
|
 |
"...a hands-on resource
examines the fundamental engineering processes of
particulate technology.."
by K. Gotoh, H. Masuda and K. Higashitani (editors)
Hard Cover, 2nd Edition
|
|
A
Working Guide to Process Equipment:
How Process Equipment Works |
Search
Amazon.com |
|
 |
"This
easy-to-read guide offers explanations of the inner workings of
equipment in process facilities."
by Norman P. Lieberman, Elizabeth T. Lieberman
Hardcover, 480 pages, December 1996
|
|
|
|
Other Book Selections |
|
|
Advanced
Polymer Processing Operations |
|
Batch
Control:
Practical Guides for Measurement and Control |
|
Centrifuge
94:
Proceedings of the International Conference Singapore |
|
Best
of Bulk Solids Handling:
Blending & Reclaiming Bulk Materials |
Cake
Formation in Particulate Systems
"For people working in industries that deal with
granules or powders, discusses the problems of caking and lumping." |
Drying
and Storage of Grains and Oilseeds
"...physical and thermodynamic properties of grain and air are
examined, and the theory of the drying process is developed. Design of
and optimal operating conditions for on-farm and off-farm dryers. |
Emulsions
and Emulsion Stability
"This invaluable reference brings together all of the
essential theories on emulsified systems and examines practical emulsification techniques,
including flocculation, creaming, sedimentation, and coalescence as well as their
applications in crude-oil-based emulsions, food emulsions, and alkyd emulsions." |
Food
Emulsions
"...classic reference presents basic and applied
aspects of food emulsions from liquid crystallization and association phenomena to their
influence on technical processes..." |
|
Fluidization,
Solids Handling and Processing:
Industrial Applications (Particle Technology Series) |
|
Fundamentals
of Ceramic Powder Processing and Synthesis |
|
Gas Fluidization
(Handbook of Powder Technology) |
Handbook of
Powder, Science and Technology
"...comprehensive coverage of the fundamentals of powder science and technology
and build upon them to emphasize practical applications in the design, production,
processing, and handling of applications. The chapters focus on problem solving, but also
provide a solid link between theory and practice." |
Industrial
Drying Equipment: Selection and Application
"Considering drying as a method for accomplishing a
liquid/solid separation by other than mechanical means, and noting that it is an
energy-intensive procedure requiring expensive equipment, suggests to process development,
process, and plant engineers what criteria to use in choosing the appropriate equipment
for their particular needs, focusing on determining the size required." |
Mathematical
Modeling and Numerical Techniques in Drying Technology
"Provides detailed information on the development of
mathematical models and numerical techniques to solve specific drying problems in areas
such as foods and grains, wood, and pharmaceuticals." |
Particle
Classification
"For engineers working in fields that involve the
reduction or enlargement of particles, including the chemical, petroleum, mining, and food
industries, describes the fundamentals of the wet-classification of particles and presents
a scientific basis for solving classification problems." |
|
Particle
Size Classifiers |
|
Pharmaceutical
Coating Technology |
Principles
of Polymerization
"The bible from the father of
polymer chemistry" |
Polymer
Processing: Principles and Design (Book & Disc)
"This book focuses on . thermoplastics -- polymeric
materials which can be molded by melting such as polyethylene which is used in the
production of many things including gloves, boats, pipes and tubing, packaging materials
and adhesives." |
|
Powder
and Bulk Solids Handling Processes |
Powder
Mixing
"The operation of a powder mixer requires a knowledge
not only of the mixing mechanisms but of the physical properties of the powders being
mixed. Powder Mixing is unique in that it explores the relevant physics of the powder
systems including characterization procedures and rheology, and contains an extensive
review of different methods that have been employed to study the structure of
mixtures." |
|
Solid-Liquid Separation |
|
Stacking,
Blending and Reclaiming of Bulk Materials |
|
Wheat
Flour Milling |
|
The
1997-98 Yearbook and Directory:
Powder and Bulk Solids Handling and Processing |
|
|
